The hand edger, also known as a grinder or disc grinder, is an abrasive tool for cutting and grinding fibreglass.
The angle grinder is a portable power tool for cutting and grinding glass and steel, mainly for cutting, grinding and brushing metal and stone.
The common models of angle grinders are divided into 100mm (4"), 125mm (5"), 150mm (6"), 180mm (7") and 230mm (9") according to the specifications of the attachment used,
with the small size angle grinder of 115mm mostly used in Europe and the USA.
Electric angle grinders are used to grind, cut, descale and polish metal components using high speed rotating flake grinding wheels as well as rubber grinding wheels and steel wire wheels.
Angle grinders are suitable for cutting, grinding and brushing metal and stone and must not use water during operation.
A guide plate must be used when cutting stone.
For models equipped with electronic controls, grinding and polishing can also be carried out if suitable accessories are fitted to the machine.
The angle grinder is an abrasive tool for cutting and grinding.
Lightweight multi-purpose angle grinder suitable for deburring and sanding.
Operating regulations:
1、With protective eye protection.
2、After turning on the switch, wait 3 to 5 minutes and observe the grinding wheel rotating steadily before working.
3、Long-haired workers must tie up their hair first.
4、The cutting direction should not be towards people.
5、Stop for 15 minutes after working continuously for half an hour.
6、You cannot catch small parts with your hands for processing on the angle grinder.
7、Consciously clean the working environment after work is completed.
Specific brands and models of angle grinders vary, please make sure to check the manual before operation.
