The perforating machine is made up of four main parts that work together to complete the perforating process.
Firstly the material is moved to the camera scanning area of the automatic punching machine, the camera scans the image and then processes it and gives a signal to the control section, after the control section receives the signal, it further processes and controls the drive section, so that the punch is positioned on the X and Y axes of the plane, after the positioning action is completed the pneumatic section starts to work and the solenoid valve controls the cylinder for the punching action.
The pneumatic part starts to work after the positioning action is completed and the solenoid valve controls the cylinder to carry out the punching action.
Conceptually speaking:
The characteristics of the glass punching machine are: small machine, high processing accuracy, stable machine, fine finished product, fast processing speed and high production efficiency.
(Due to the characteristics of glass processing, compared to ordinary fine engraving machine, glass punching machine necessary for a number of technical improvements to meet the requirements of production.)
The characteristics of glass: good light transmission, surface toughening and wear resistance, and has an excellent feel. However, the disadvantage is that it is fragile and easily damaged, and it is a major difficulty to achieve fine glass forming.
Processing principle:
Glass punching machine processing glass using the tool is generally used diamond grinding head, with 24000 ~ 40000 rpm spindle high-speed rotation, processing is actually to grind rather than cutting.
With the special grinding head, it can realize the opening, slotting, one-time chamfering of the top and bottom of ultra-thin glass, precise cutting of shaped glass, shape processing, chamfering, etc.
The error can be controlled at ±0.02~±0.05mm, and the glass edge is not easy to chipping and breaking.
The glass edges are not easily chipped or broken.
The machine can also be used for continuous batch production according to the designed jig.
Processing range:
Touch screen glass thickness is generally 0.55mm, 0.7mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, especially 1.0mm or less is more widely used.
This machine is most suitable for drilling CR and PC lenses; the reverse taper drill system allows drilling on both sides, the same Precise positioning to avoid debris; after drilling, place the lens under the reamer, lift it up and expand it to the desired size.
