How To Solve The Fog When We Wear Glasses ?
In winter, a lot of friends who wear glasses will encounter glasses from the fog problem, from the outside to the warm house, the eyes will fog, especially after wearing masks, we breathe out of the heat more easily fog lenses, let a person worry unceasingly. So what are some ways to solve this problem? Take a look.
First, what is the reason for wearing masks and glasses fogging in winter?
Of fog in winter, the lens is a physical phenomenon, it is normal phenomenon, because of the exhaled gas cooled lenses, the phenomenon of liquefaction, makes the lens appears above a layer of mist, combined with the general ordinary masks on the circumference is not the seal, so bring gas would run up, are more likely to lead to lens of fog.
Two, wear masks in winter glasses fog how to do?
1, wipe the lens with soap
You can use semi-dry, a little soft soap to wipe the lens a little bit, and then wipe it evenly with a glass cloth, it is best not to use water. You can also use a mixture of essential oil and soap, and then add a few drops of turpentine to shake it well. When using, apply a little bit on the lens, and then wipe it gently with a glass cloth. Anti-fogging can last for 3-4 hours, so that even when wearing a mask, the problem of glasses fogging can be easily solved.
2, wash the lens with detergent
You can use detergent to add appropriate amount of water into the mixture, with glasses cloth dipped in some of the mixture, and then wipe the glasses to dry naturally. Here's the active ingredient in dishwashing liquid: Anionic surfactants form a film on the surface of eyeglasses. This water-loving, oil-loving molecule pulls fog onto the surface of eyeglasses as a film of water, rather than as a bead, so it can't be seen.
3. Wear masks correctly
When wearing masks and glasses fog, we should ensure that the way we wear masks is correct. We can lift the masks up a bit first, and then adjust the bending degree of the steel wire on the mask, so that it closely fits the bridge of the nose, and the gap on both sides of the nose is tight, so that there will be no gas running out. Then press the glasses on the mask, so that the small amount of heat escaping is not easy to contact the lens condensation, so as to avoid the lens fog phenomenon.
